Kraftform Plus screwdrivers enable a higher transfer of force with less effort, and relieve the entire hand-arm system - even with intensive use. In addition, the safety issue, always a top priority at Wera, is very much in focus for series 100 VDE screwdrivers. The quality of the blades exceeds current standards with regard to hardness and torque strength. Every tool is tested individually for dielectric strength under a load of 10,000 volts, so as to ensure safe working with loads up to 1,000 volts.
The individual testing in a water bath at 10,000 volts, in accordance with DIN EN 60900 (IEC 60900:2004), ensures safe working with loads up to 1,000 volts.
The outstanding design of the Kraftform handle ensures that it fits perfectly into the hand, preventing hand injuries such as blisters and calluses.
The hard materials used for the handle ensure rapid hand repositioning, without any danger of the skin "sticking" to the handle. The softer "anti-slip" zones enable the low-loss transfer of high forces - resulting in less screwdriving effort being required.
Impact strength tested at - 40°C, guaranteeing safety even under extreme conditions.
The screw symbol and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case or at the workplace.
It happens time and time again that the tip slips out of the screw head when screwdriving, potentially damaging surfaces, and occasionally even making contact with live components. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head - preventing slips. This allows the user to feel secure in their safety, particularly when working on live wires.
Laser treatment burns a micro-rough surface into the tip of the blade with an edge hardness of up to 1,000 Vickers. The drive end literally "bites" into the head of the screw. The advantages: safer working and less slipping.
The hexagonal non-roll feature prevents any annoying rolling away at the workplace.
The screwdriver sets are supplied with a rack that can be attached to the wall. This ensures organised storage and quick & easy access. The rack is also available as an individual item.
CODE 05006145006 160 i VDE 1 x
0.4x2.5x801) 1 x
0.6x3.5x100 1 1 x
0.8x4.0x100 1 x
1.0x5.5x125 162 i PH VDE 1 x
PH 1x80 1 x
PH 2x100 1) without Lasertip