This voltage/current converter is part of the range of Harmony Analog interfaces. This cost effective converter converts a 0 to 10 V signal to a 4 to 20mA signal or vice versa. Its supply voltage is 24V DC, non isolated. It also allows the connection distance between a sensor and the measurement acquisition device to be increased. Conforming to IEC standards, UL and CSA certified, this converter is suitable for universal use.
Range of product : Harmony Analog
Product or component type : Voltage/current converter
Analogue input type :
Analogue output type :
Protection type :
abnormal analogue output voltage : -15...0 V no input or input wire broken
abnormal analogue output current : 4…30 mA no input or input wire broken
[Us] rated supply voltage : 24 V DC +/- 20 %, non isolated
Current consumption :
Local signalling : LED (green) for power ON
Measurement error : +/- 5 % of full scale at 20 °C (temporary performance degradation when subject to electromagnetic interference)
Repeat accuracy :
Temperature coefficient : 200 ppm/°C
clamping connection capacity
Tightening torque : 0.6…1.1 N.m
Marking : CE
Surge withstand : 0.5 kV during 1.2/50 µs conforming to IEC 61000-4-5
[Ui] rated insulation voltage : 2 kV
Fixing mode :
Safety reliability data :
Net weight : 0.12 kg
Standards :
product certifications :
IP degree of protection :
Fire resistance :
Shock resistance : 50 gn for 11 ms conforming to IEC 60068-2-27
Vibration resistance : 5 gn (f= 10…100 Hz) conforming to IEC 60068-2-6
Resistance to electrostatic discharge :
Resistance to fast transients :
Disturbance radiated/conducted :
Ambient air temperature for storage : -40…85 °C
Ambient air temperature for operation
Pollution degree : 2 conforming to IEC 60664-1